押忍 番長カジノ 初回入金ボーナス

This can be applied to exhaust systems, intake systems, Oil and Gas pipelines, and HVAC ducts. It offers a complete characterization of the system using both simulations and verification measurements.

スロット データ

If you are a muffler designer, HVAC Engineer, Acoustic Engineer that simulates propagation of sound through any closed area. It is time to avail from SIDLAB 5!

TRY SIDLAB

SIDLAB displays with pride Modules to serve your needs...

K8の賭け条件は?

This module models the generation and propagation of low-frequency sound in complex duct networks. The frequency range is limited to the plane wave region in the connecting pipes. It is based on linear acoustic theory and all elements, e.g., a complex muffler, are reduced to two ports while terminations and sources are represented as one-ports…. Read More

押忍 番長会員登録

This module models the propagation of sound inside ducts in the high frequency range using power method. It is hard to specify accurately at which frequency this range starts but it is assumed that high frequency region begins from double to three times of cut-off frequency of the first mode, in this range a large… Read More

Flow

This module is an add-on SIDLAB Acoustics. This is a very quick 1D tool to calculate the pressure drop introduced by the designed muffler system. It calculates the flow distribution and pressure drop inside the network using a two-port formulation, and feeds the results into the acoustic calculation in SIDLAB Acoustics. The acoustic performance of… Read More

Acquisition

SIDLAB Acquisition is used to acquire the measurement data needed to characterize the passive acoustic properties (e.g. Transmission Loss) of two-port elements (e.g. exhaust or intake mufflers). SIDLAB Acquisition is provided together with a Data Acquisition System and the measurement microphones. It automates the measurement procedures accounting for different theoretical and practical considerations. Different excitations… Read More

Measurement Rig

Muffler Performance Measurement Mufflers are widely used to reduce the exhaust and intake noise of fluid machines for different applications. Every muffler has to be tailored carefully to the engine to which it is connected. One very important tool of muffler design is the measurement of its properties, acoustic performance, and pressure drop. The introduction… Read More

Who We Are

SIDLAB is a software and hardware solutions for the simulation and analysis of sound propagation and generation inside duct networks.

This can be applied to exhaust systems, intake systems, Oil and Gas pipelines and HVAC ducts. It offers a complete characterization of the system using both simulations and verification measurements.

LEARN MORE